How to make USB bootable for window 7 and window 10

How to make USB bootable Using Command Line

How to make USB bootable for window 7 and window 10
How to make USB bootable for window 7 and window 10 Photo by: https://techcaption.com

We have somany reasons why one may wish to boot his system using a USB bootable device. USB bootable device can be a flash drive, hard disk or any other external saving device that has been configured to aid system in booting and recovery process. The USB uses some special kind of softares stored in it.

Any time you boot your computer using a USB, you are actually running your pc using the operatinng system saved on USB flash drive.
When you use the USB bootable, booting your computer with it makes the computer run with the operating system installed on the USB flash.

It takes a about ten to twenty minutes for your computer to boot if you are running it with a bootable USB device.

This 1st method can be applied to Windows Server 2012 R2 Essentials, Windows Server 2016 Essentials,  Windows Server 2012 Essentials

You can make USB bootable to use to deploy the Windows Server Essentials . The very 1st step is to make ready the USB flash drive by making use of DiskPart, which is a command-line utility. 

To make USB flash bootable

  1. Add a USB flash drive into a running computer.
  2. Open a Command Prompt window as an administrator.
  3. Type diskpart.
  4. From the above command line window which opens, to find out the USB flash drive number or drive , at the command prompt, type list disk,  after you tab ENTER. Then the list disk command will displays every of the disks on your PC. Notice the drive amount or drive letter of the USB flash drive.
  5. In the command prompt, type select disk , where X is the drive number or push letter of the USB flash drive, then click ENTER.
  6. Type clean, and the tab ENTER. This command will deletes every data in the USB flash drive.
  7. To make a new primary partition on your USB flash drive, then kind create part pri, and then click ENTER.
  8. To select the partition that you just made, type select part 1, then click ENTER.
  9. To format the partition, type format fs=ntfs quick, and then click ENTER.

    Important
    In the chance that your server platform will support Unified Extensible Firmware Interface (UEFI), you will have to ensure that the USB flash drive is formatted as FAT32 rather than as NTFS. To format the partition as FAT32, type format fs=fat32 quick, then click ENTER.
  10. Type active, then click ENTER.
  11. Type exit, then click ENTER.
  12. After you finish preparing your custom made image, save it to the origin of the USB flash drive.

 

Create a bootable USB flash drive to restore a client computer

In the event you need to revive a client computer from a present backup but cannot track down the Restore CD that came with your server (from Windows Server Essentials) or you don’t want to establish the client restore service in your own server (in Windows Server Basics ), you may make a bootable USB flash disk. After that you can use the USB flash drive to begin the client pc and restore the system. The USB flash drive that you use must be at least 1 GB or larger.

  1. Open the computer Dashboard.
  2. Click the Devices tab.
  3. From Tasks pane, click Customize Computer Backup and File Background settings.

    Note: In Windows Server Essentials, click the Client computer backup jobs .
  4. Tab the Tools tab, and then tab the Create key in the Computer recovery section.
  5. Add a 1 GB or larger USB flash drive in the machine, then follow the directions in the wizard.

     

Caution
All information on the USB flash drive will be deleted.
 

Bootable usb win 7 By ISO File & Installation

This tutorial on how to make bootable usb for windows 7, can aid you with the setup of Windows from image (.iso and .img) file using USB Drive.
This is a step-by-step method. Without any CD/DVD.
An ISO file unites all the Windows installation files into a single uncompressed file — such as a DVD backup or clone. With ISO file so it is possible to create (burn) a bootable DVD or USB drive containing Windows installation documents.
This permits you to set up new Windows OS on your PC. If you change the boot sequence of drives in your PC’s BIOS, it is possible to run the Windows setup directly from the DVD or USB drive when you first turn on your computer. You may look for information about how to change the boot sequence of drives in your PC BIOS.

Windows 7 bootable USB Installation Guide


You will need the Windows image file PLUS  ISO into USB burner software PLUS the USB flash drive to make bootable usb win 7 Install Disk.

Download Windows 7 Ultimate ISO Document

If you do not already have windows 7 picture then you can find the ISO file from Windows 7 download page. Pick 32bit or 64bit version.

Download and Install Windows 7 USB/DVD tool

This is Microsoft’s real tool to make USB drive bootable.
In other to install the Windows USB and DVD Tool, you have to be the computer administrator on which you are installing the software.

Users that are running 32bit Windows need”bootsect” file to burn (copy) 64bit ISO file on USB drive .

Bootsect.exe must be present in exactly the same folder as the .iso file. It can be downloaded here
 

Bootable usb creator from ISO Document

 

After downloading the above USB tool for Windows 7. Make a copy of your Windows ISO file into the USB, using this Tool.

Step 1 — Open this instrument out of your programs. Click on Browse button and go to the path where your windows iso document is located. Select Windows 7 ISO file and click on Open.

Step 2 — Click on USB Apparatus as media type you would like to utilize to make Windows 7 bootable USB drive.

 

Step 3 — From Drop Down box pick the USB Pen drive correspondence, e.g., H: or Ior G: and then click Begin copying. After the procedure is finished the USB has become bootable. Turn off your computer and plug in USB. Now Turn on Computer and then boot it from USB. That’s all.

When your Windows ISO document is copied, install Windows by moving to the root of your USB drive, and then double click Setup.exe.

How create bootable usb windows 10 using rufus software

Using rufus to install windows 10 is a new method 100 percent Working & Tested.

Rufus software is a usb app that aid in the formatting  and making of bootable USB flash drives for windows and mac, For example USB pendrives, USB keys, sticks, memory etc.

Rufus usb software can be of great use in cases where:

  • One may need to make USB flash drive installation media from a bootable ISO like Windows,UEFI, Linux
  • One may need to carry out services on computer that does not have an OS (operating system) installed in it
  • One need to flash an existing BIOS and any other type of firmware from a DOS
  • One wish to run a low-level utility

Despite its presumed little size, Rufus software makes available everything you may need!

Install the Rufus Software and Open it. It can be downloaded here.
After you open it. Follow rufus installation steps below:

  • Plug in your Pen Drive to USB Flash Port.
  • To make a Windows bootdisk (Windows XP/7) pick NTFS as file system in the drop down.
  • Click on the buttons which resembles a DVD drive, which you close to the checkbox that says”Create bootable disc using:”
  • Choose the XP ISO file.
  • Click Start, Done!

About umoh

The CEO and founder of Business Ideas Incubation Services.Our services includes: Professional business plan writing for venture capital, market research and analysis, Feasibility studies and startup business consulting.+2348140970926

Leave a Reply

Your email address will not be published.